 |
Bosch PS10-2A 12-Volt Max Lithium-Ion Driver Kit by Bosch
List Price: $273.00Our Price: $137.49You Save: $135.51 (50%)Availability: Usually ships in 24 hours Category: Tools See more product details
Product DetailsManufacturer: Bosch Model: PS10-2A Product features: - 80-Inch --pounds. of Torque & no. 8212; Drives 100 3-Inch screws per battery charge
- Ultra-Compact Head Length & no. 8212; 3.5-Inch total head length - 3 times shorter than most popular competitor
- 90-Degree Articulating Head & no. 8212; Rotates and locks-Inch to five positions for-increased versatility
- 7+1 Electronic Clutch & no. 8212; Precision driving, eliminates over torque-Inch soft base materials. Drill mode allows pilot and other small bore holes.
- Quick Change Chuck & no. 8212; Prevents bit loss-Inch drill or drive mode - pull to-insert or release 1/4-Inch hex shank bits
Accessories:
Description of Bosch PS10-2A 12-Volt Max Lithium-Ion Driver KitBosch PS10-2A 12 Volt Max Litheon I-Driver PS10-2ABosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch PS10-2A 12 Volt Max Litheon I-Driver PS10-2A Features:; Cordless Drill; The ultra compact head is just 3.5" total head length allowing the I-Driver to fit where traditional drills, even right angle drills, cannot go; 90 ° articulating head with five position locks helps the user get to hard to reach spots with ease; 80 inches per pound of torque gives you the power you need for driving screws; The Litheon advanced lithium ion battery drives one hundred 3" screws per charge; Revolutionary variable speed trigger design provides increased sensitivity and control; Reversible drive allows the pocket driver to be equally useful at driving or removing screws; Seven setting electronic clutch enables precision driving and eliminates over torque in soft base materials; The drill mode allows pilot and other small bore holes; Built -in quick change chuck allows quick change between bits while preventing bit loss, simply pull to insert or release 1/4" hex shank bits With its ultra-compact design, the Bosch PS10-2A 12-Volt Max Lithium-Ion Impact Driver Kit is a valuable complement to your high-voltage tools. Offering big power, a small package, long-lasting, efficient performance, optimum comfort, and reliable control, this driver kit comes with a storage bag and two rechargeable Litheon batteries.  | The PS10-2A 12-Volt Max Lithium-Ion Impact Driver Kit offers:- Litheon batteries for long-lasting performance.
- Articulating head locks in 5 positions.
- Electronic clutch for versatility.
- Ergonomic design to minimize user fatigue.
|
|  |
| 
The first professional tool to rotate 90 degrees. View larger. |
 |  |  | Compact body and rotating head let you access hard-to-reach areas. |
| 12-Volt Litheon Batteries for Long-Lasting Power The PS20-2A gets its power from Litheon batteries, the most advanced lithium-ion batteries available today. These batteries allow more battery charges and provide longer runtime with no memory effect--meaning the batteries don't need to be empty before charging. The batteries can also be taken out of the charger before charging is complete.Other benefits include: significantly less self discharge; electronic cell protection that guards against overheating, overload, and deep discharge; and no loss of power from the first to last screw or hole. Best of all, these batteries will fully charge in 30 minutes and will be at 85% capacity in just 15 minutes. Compact and Powerful for Most Drilling/Driving Applications Small and powerful enough to go where power tools could never go before, the PS10-2A handles 80% of all drilling and driving applications and easily fits in a belt pouch. The driver uses 1/4-inch hex bits that change easily thanks to the quick-change chuck, and it features a comfortable and responsive two-finger trigger. Compact, Articulating Head for Easy Access of Hard-to-Read Areas With its compact head that measures 3.5 inches and extended length of just under one foot, the PS10-2A is three times shorter than the leading competitor and is the first pro tool to rotate 90 degrees. Without the cumbersome pistol grip of most comparable drivers, the PS10-2A features a sturdy tool body and an articulating head that rotates and locks in five different positions. And because the head is so compact, you can slide this tool into hard-to-reach areas or tight corners, like between studs, under the sink, and between joints. Electronic Clutch and Responsive Trigger for Precision The PS10-2A provides 80 in./lbs. of torque, which allows you to drive approximately 100 three-inch screws per battery charge. Additionally, its 7+1 electronic clutch ensures precision driving by letting you match the correct speed to the task at hand. The driver's trigger boasts a revolutionary design that provides increased sensitivity and control and eliminates over-torque in soft base materials. An added bonus, the design makes it easy to switch to the drill mode for making pilot and other small bore holes. Smart Features for Easy Use To help minimize work fatigue, even as you position the drill over your head or at awkward angles, the PS10-2A's cushion-grip handle ensures comfort in the grip zone. For added convenience, an integrated hanger hook allows for easy tool storage and accessibility. ProVantage Guarantee The PS10-2A comes with the ProVantage three-year protection plan, which guarantees two years of battery protection and one year of tool protection. Under this plan, you can receive two years of free battery replacements, tool replacement for one year, and a free tool repair package for the second and third years. What's in the BoxPS10-2A; one carrying case; two 12-volt batteries; one 30-minute charger; and two 1.5-inch drive bits.
 | | 12V Max Lithium Ion Family of Tools | | For more information, click on the images below |  |  |  |  | PS10-2A Impact Drive Kit
| PS20-2A Pocket Driver with Two Batteries
| PS50-2A Multi-X Cutting Kit
| PS50-2B Multi-X Carpenter Kit
|  |  |  |  | PS30-2A 3/8-Inch Drill/Driver
| PS40-2A Impact Driver
| CLPK21-120 Impact Driver and Pocket Driver Combo Kit
| PS70-2A Metal Shear
|
Tools and Hardware Reviews of Bosch PS10-2A 12-Volt Max Lithium-Ion Driver KitCustomer Review: Nicely engineered tool Summary: 5 Stars
To me what says a lot is that when Bosch first introduced this line of sub-compact tools, they correctly labeled them as 10.8 volt. When their competitors saw what success Bosch was having with the line, they copied them, and came out with their own versions. The competition called them 12 volt, which as I've learned is not the rms voltage, but is a marketing gimick. I understand why Bosch relabeled their line the same way, and I guess you're being pretty successful when your competitors copy your products.
I've had this particular model for 2 years and have come to really like it. The shape with the rotating head is, or was unique until others started copying that too. 600 rpm is fast for a 1 speed and it really has good power for the size. The trigger took a little getting used to being that it turns on an instant after you hit it, but it's not a 1/2 second as another reviewer said, and it varies the speed quite well unlike said reviewer found. He may have gotten a defective unit.
I really like the clutch, an electronic rather than mechanical one. I find it very accurate and easy to work with and find that I rarely use it in the "drill' position. But on a recent occasion I did, and this drill saved me from having to go out and find a 5 foot flexible bit, which would have cost me $40+.
I was in a basement needing to drill a hole through the top plate into a wall so I could install a thermostat. It was double plated(2 2x6) and my cordless drill wouldn't fit in the space between the floor jousts, so my only other option was get a flexible bit and drill up from the hole I'd cut in the drywall. Then I thought of the PS10 with a spade bit. I used a 1/2 inch bit and it took a while but the drill performed well, though I didn't let it heat up. Yet another handy application.
Though excellent, it's not perfect. I would still prefer a 2 speed gear box, but other than that, it's pretty trick.
Drills
|
 |