Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand
by Bosch
List Price:
Our Price: $569.99
You Save: $600.01 (51%)
Availability: Usually ships in 24 hours
Buy Used: from $490.19 (click here)
Category: Tools
See more product details
Product Details
Manufacturer: BoschModel: 4100-09
Product features:
- Amperage - 15 Voltage - 120V Arbor Size - 5/8-inch Bevel Angle Range -2° to 47° Blade Diameter - 10-inch Description 10-inch Worksite Table Saw with Gravity-RiseTM Wheeled Stand Dimensions 39.13-inches x 30-inches x 20.9-inches Max. Motor HP - 4.0 No Load RPM - 3,650 Weight (lbs.) Saw - 60 lbs. (with Stand 99 lbs.) Working Length Table Top dimensions 29-inches
- Squarelock rip fence engineered for maximum trueness
- Includes the new enhanced award-winning gravity rise stand by Bosch
- Durable Sub-Base increases tool life by handling job-site abuse
- Integrated carry handles increase portability
- Single point bevel movement for consistent accuracy; 1-year warranty
- Bosch TS2000 Gravity-Rise Wheeled Table Saw Stand
- Freud LU74R010 10-Inch 80-Tooth ATB Thin Kerf Cut Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating
- Freud LU83R010 10-Inch 50 Tooth ATB Thin Kerf Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating
- Freud LM74R010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
- Freud LM75R010 10-Inch by 30t TCG 5/8-Inch Arbor Glue Line Rip Saw Blade
Description of Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand
The Bosch 4100 Table saw offers radical new features and enhancements that make the 4100-series a precise, durable and high-performing table saw. The 4100 features the industry's first-ever modular smart guard system. Other innovations include a super-durable sub-base with carry handles, Bosch-exclusive SquareLock Rip Fence with auxiliary fence slots, and a t-slot miter gauge. With all these features, the new 4100-Series 10-inch portable table saw will keep Bosch at the top of the category. The Bosch modular smart guard system is a ground-breaking new design for portable table saws that includes a blade guard, riving knife, and anti-kickback pawls. All three elements are modular and tool free, so users can quickly and easily remove or add each component independently based on the task. The blade guard is particularly user-friendly with a new split-guarding innovation that offers optimal line of sight and maximum protection. The riving knife prevents material from pinching the blade and offers positions for: full upright, "splitting," and "non-thru" cutting. For professional tools, durability is an essential component of jobsite value. The 4100 is jobsite proven with a super-durable sub-base complete with integrated carrying handles for quick and easy transport. Other improvements include a single-point bevel movement for consistent accuracy, t-slot miter system, and enhanced dust collection. The 4100 also offers Constant Response Circuitry with Soft Start for smooth ramp up speed and to maintain speed under load. At 29 by 21-1/2-inches square, the table saw provides the most usable tabletop space available with a 25-inch rip capacity that can easily handle sheet goods or larger stock. The arbor lock system makes blade changes quick and easy. On-board storage for accessories and the Smart Guard System makes it easier to move between jobs.With first-of-its kind design features, the Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand (TS3000) is built for effortless, efficient, and accurate cutting that lets you deliver products faster. And with its portable construction, which allows for transfer across even the roughest terrain, it makes an ideal addition to any work site.
| ||||
 |
 With its Gravity-Rise Stand and pneumatic wheels, the table travels and sets up easily.View larger. |
 |
The innovative Gravity-Rise Stand (TS3000) uses patented technology to make setup and take down quicker than ever, so you can spend more time working. And it's extremely portable: the eight-inch treaded pneumatic wheels can handle the toughest terrain with ease, and the collapsible design minimizes storage space requirements, so transporting this stand to, from, and around the jobsite is a breeze. This stand may be lightweight at 39 pounds, but it's built for durability, sporting a powder-coat finish for longevity.
(If you are looking for a stand that includes adapter plates to accomodate competitive saws, you can purchsae Bosch's TS2000, sold separately.)
Powerful Table Saw Designed for High-Precision Cutting
The 15 Amp, 10-inch table saw generates a maximum 4 HP and 3,650 RPM for exceptionally clean cuts. Additionally, the tool features soft-start and Constant Response electronics for exceptional power management and constant speed under load. It features a 5/8-inch arbor size for use with compatible blades and will make bevel cuts between -2 and 47 degrees in addition to dado cuts up to 13/16 inch. An optional, unique easy-to-read digital measuring display (DC010, not included) can be attached to the fence to take measurements for cuts within 1/32 of an inch.
Large Cutting Table and Squarelock Rip Fence
Made from precision machined aluminum for rugged durability and long life, the 29 x 21.5 inch cutting table easily handles large stock for greater ripping capacity up to 25 inches wide.The best-in-class Squarelock Rip Fence is engineered for maximum trueness, so you get maximum accuracy with every cut. The innovative rip fence glides across the cutting table with ease for simple one-handed operation, and it locks in place for making consistent precise cuts.
Smart Guard System for Added Protection and Visibility
The first-of-its-kind Smart Guard System is a completely tool-free design that provides unparalleled visibility and enhanced user protection, so you can see the cuts better while helping avoid kickback or blade contact. The modular three-piece system includes a built-in riving knife, blade guard and anti-kickback pawls, all which install within seconds and require no tools.
The Bosch 4100-09 10-Inch Table Saw with Gravity-Rise Stand measures 39.13 x 30 x 20.9 inches and weighs 99 pounds (saw and stand). It is backed by a one-year limited warranty, 30-day money back guarantee, and one-year service protection plan.
What's in the Box
Bosch 10-Inch Worksite Table Saw, TS3000 Gravity-Rise Table Saw Stand with Pneumatic Wheels, Squarelock Rip Fence, T-slot Miter Gauge, and Smart Guard.
 |  |
Tools and Hardware Reviews of Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand
Customer Review: Great saw for serious DIY'er
Summary: 5 Stars
I used to be a framer. I now work in engineering. I decided to build myself a house, a good 10 years removed from my trade as a framer.
Part of that was to aquire a new set of tools. I got the basics back:
Worm Drive saw
Sliding compound miter saw
Regular bag hand tools
couple of laser levels and a nice Stabila bubble level
table saw
Air nailer(s)
I did a lot of research on the table saw and went to the big box stores to get a feel for a few of them. This saw, hands down, beat everything I checked out including the old clunker I had kicking around my garage.
Fence: easy to use, and accurate. Maybe not furniture guy accurate, but I was able to shave down LVL rim board by 1/32" at a time, and acutally hold the paper thin shaving in my hand.
Included blade: meh. Great for an 'included' blade, but not the nicest one I've used.
Assembly: It's a Bosch. Read the directions, and take your time. I set aside time for assembly instead of trying to put it together and cut wood before coffee time.
Anti-kickback B.S.: So, I've been guilty of taking safety gear apart in an effort to actually use a tool. The anti kick pawls, plastic finger guards and riving knife are still on my saw. They work really well, out of the box, so They stay on, and I use them. 10 out of 10 on those. I had to take them off to cut down an assembled plywood box. A couple of spring loaded clips and it was off. The riving knife slides out of the way and locks below the table. smart, easy to use and efficient.
Power: No banging or circuit breaker-ing. Nice quiet soft start, and gets to speed faster than I can really shove wood into it. Quiet enough to leave on between multiple cuts (like angled bird blocks) without getting to obnoxious. It is, however, a table saw. They're a bit loud.
Ripping: awesome, smooth and handles knotty Hem-Fir, LVL framing material, finish plywood, CDX and Pressure treated plywood with ease.
cross cutting: great, but I use the compound chop saw for most of this.
Blade angle adjustment: I would prefer to see some sort of pressure system here. Once you loosen the release knob, the saw assembly is basically free swinging. makes it hard to adjust fine parameters, and you can easily whack the back of your hand trying to hold the assembly and loosen the keeper at the same time.
Blade depth adjustment: fast and easy. I'd feel better if it had a positive lock for depth. I never saw it move, but I also didn't run dado's or anything that was depth critical.
Gravity Rise Stand: Easy to roll even on it's small tires. I don't like that it won't go up stairs due to wheel size. I also don't like that you set one side, and then the stand rolls toward you to open up. It means you have to make sure you've got room to open up the stand before you start to open it up, and you pace backward. I find that awkward in tight spaces. That being said, it's a snap to fold it up and shove it in a corner when your done. I'm not a fan of the pneumatic tires, but I don't dis-like them.
Push Stick: weird, but completely usable.
Extend-o-table: Works just fine, fence is still straight.
The end result is a great portable table saw. I ripped a bunch of shelves for a friend. Something like a dozen 3/4" plywood pieces 14"x16". Saw cut clean, never bogged down and the fence remained absolutely straight. ALL the shelves were identical in ripped width. I saw no movement of the fence or wobble of the blade over the repetitive cuts. I felt comfortable trimming the shelves by 1/16"; usually I'd leave that to sanding. This saw cuts clean and straight enough to take a half a kerf off without a worry. Same went for 80 framing roof blocks cut from 2x10 with a bevel on them. No problem. Cuts were accurate and clean.
Buy the (not included) left side extension table. Totally worth it.
I don't recommend ripping a full sheet of plywood on this, but that being said, I managed to do it, by myself, with 1/2" ply. ONLY with the extra feed table though.
All the con's don't even come close to outweighing the pro's of this saw. Very happy.
I've owned it for about 6 months now, so I can say with some confidence I'm still very happy and don't regret it for a minute.
More Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand Customer Reviews:
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
Table Saws
Tools and Hardware
Bestsellers in Table Saws
Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip FenceBosch; Tools
Best price: $739.99
Price in other shops:
Metabo TS250 10-Inch Table Saw without StandMetabo; Tools
Price in other shops:
DELTA 36-979 10-Inch Left-Tilt 1-1/ 2-Horsepower Contractor Saw with No Fence, 115/ 230-Volt 1-PhaseDelta; Tools
Price in other shops:
Factory-Reconditioned DELTA 36-545R 10-Inch Bench Saw with StandDelta-Reconditioned; Tools
Price in other shops:
Delta 36-681 10-Inch Left Tilt 1-1/ 2 Horsepower Contractor Saw with 30-Inch Unifence, 1 Cast Iron Extension Wing, and Table Board, 120/ 240-Volt 1 PhaseDelta; Tools
Price in other shops:
DELTA 36-L51X-BC50 10-Inch Left Tilt 5-Horsepower Cabinet Saw with 50-Inch Biesemeyer Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1-PhaseDelta; Tools
Price in other shops:
JET 708776K JWSS-10PFX Supersaw 10-Inch Left Tilt 1-3/ 4 Horsepower Intermediate Saw with 52-Inch Xacta II Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 115/ 230-Volt 1 PhaseJET; Tools
Price in other shops:
Factory-Reconditioned Porter-Cable 3812R 15 Amp 10-Inch Portable Table SawPorter-Cable - Reconditioned; Tools
Price in other shops:
Factory-Reconditioned Bosch 4000-N-RT 10-Inch Worksite Table SawBosch; Tools
Price in other shops:
Factory-Reconditioned DEWALT DW744R 13 Amp 10-Inch Portable Table SawDEWALT; Tools
Price in other shops:
Similar Tools and Hardware Products
Bosch DC010 Digital Carriage Display for 4100-series Table SawsBosch; Tools
Best price: $105.02
Price in other shops:
Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/ 8-Inch Arbor and PermaShield CoatingDiablo; Tools
Best price: $37.00
Price in other shops:
Freud D1050X Diablo 10-Inch 50-tooth ATB Combination Saw Blade with 5/ 8-Inch Arbor and PermaShield CoatingDiablo; Tools
Best price: $33.27
Price in other shops:
MLCS 9167 Safety Push Block and 5-Piece Stick PackageMLCS; Tools
Best price: $19.95
Price in other shops:
Bosch TS1005 Zero Clearance Insert AssemblyBosch; Tools
Best price: $5.05
Price in other shops:
Freud SD208 8-Inch Professional DadoFreud; Tools
Best price: $79.80
Price in other shops:
Bosch TS1004 Table Saw Dust Collector BagBosch; Tools
Best price: $10.17
Price in other shops:
Bosch TS1007 Dado InsertBosch; Tools
Best price: $10.20
Price in other shops:
Bosch TS1002 Table Saw Rear Outfeed Support ExtensionBosch; Tools
Best price: $24.50
Price in other shops:
Bosch TS1003 Table Saw Left Side Support ExtensionBosch; Tools
Best price: $19.25
Price in other shops: